Posts tagged: Print

Print China 2019 – Second Biggest Print Trade Show

Ralf Schlozer
 May 2, 2019

Print China, Asia’s largest printing industry exhibition, has been held every 4 years since 2007. The 4th iteration of the show took place from April 9th to 13th at the Guangdong Modern International Exhibition Center. The trade show alternates with China Print in Beijing, which is also held every four years and caters to the general printing industry as well. Since the Chinese market is so vast, both shows have a unique regional appeal—Print China focuses on Southern China while China Print caters to the Northern China printing industry. Both shows have the same organizers and are sponsored by the Printing and Printing Equipment Industries Association of China (PEIAC). Both shows are large enough to attract local as well as international visitors, primarily from the Asia Pacific region – the organizers claim visitors from more than 100 countries. Language can sometimes still be a barrier, and not all vendors are well-prepared for a discussion in English.

A final post-show statement for 2019 is not yet available, however Print China 2015 already set an historical record with a total trade volume of nearly 6 billion RMB (about US $1 billion, intended transactions included). This represented an increase of about 20% in relation to Print China 2011. In addition, Print China 2015 surpassed the 8th Beijing International Printing Technology Exhibition (China Print 2013) to become the largest exhibition in Asia and the second-largest in the world (Drupa in Germany captured the first place spot). About 206,000 visitors attended Print China in 2015, up 20% over 2011. The preliminary count for 2019 amounted to just over 200,000 visitors—in line with what was seen four years ago. The 2019 event attracted 1,200 exhibitors from 28 countries. Print China covered several halls of the Dongguan Exhibition Centre, with many halls having two floors. While the ground level floors were packed with exhibitors and visitors, the upper level was decidedly less busy. Print China 2019 accommodated 140,00 sq. meters of space, only slightly smaller than Drupa 2016 (158,237 sq. meters).

Print China Entrance

Read more »

Kornit Discover – Turning a Vision Into Reality

Ron Gilboa
 Apr 24, 2019

In a series of customer engagement discovery events in Europe, US, and Asia, Kornit Digital celebrated customer success and shared its vision for direct to garment and digital textile printing.  Keypoint Intelligence – InfoTrends (InfoTrends) contributed to and attended the event in Asia, where over a hundred Kornit customers from across the region (including China, Japan, and other Asia Pacific countries) were in attendance. The event was held in the company’s offices in Hong Kong from April 15th till April 17th.

Read more »

Epson Re-ignites OEM Market with Precision Core Printheads

Ron Gilboa
 Apr 8, 2019

At the end of March, the Seiko Epson Corporation (Epson) announced that it plans to return to the OEM market with a new lineup of PrecisionCore printheads. According to the company, the move was made to help expand digital printing capabilities in commercial and industrial environments.

Read more »

Gen Z: An Important Group of Photography Consumers

Alan Bullock
 Jan 18, 2019

This article originally appeared in Digital Imaging Reporter – January 14, 2019


Many pundits assume that gen Z consumers are not that interested in traditional photo activities, such as ordering prints and custom photo merchandise. After all, they were born into a world of digital cameras, social networks and omnipresent screens.

However, a recent Keypoint Intelligence – InfoTrends study indicates that this group of more than 73 million people, born between 1998 and 2010, is actively engaged in photography. Moreover, the study suggests that gen Z is worthy of imaging vendors’ marketing attention. Read more »

When Should PSPs Outsource Print Products?

Marc Mascara
 Jan 16, 2019

Print service providers (PSPs) exist in a competitive landscape. Despite being a mainstay technology used to address a diverse range of applications  print faces challenges in the 21st century. The digital revolution is in full swing with new innovations making headlines daily. On top of this, the print world itself is seeing a smaller upheaval in the form of digital printing as a replacement/supplement of traditional offset.

For those seeking to turn a profit, this pace of change means frequent challenges. The new landscape has altered customer demand, placing more emphasis on shorter runs and high value product applications. Businesses, especially those small to medium-sized, are constantly trying to eliminate the advantages of larger competition. One such benefit that large PSPs enjoy is a wide product portfolio – one that can meet most any customer demand.

Read more »

What genARate Means to the Print Market

Colin McMahon
 Dec 14, 2018

Released last month, genARate is a new software tool from Konica Minolta. The platform specifically focuses on applying augmented reality (AR) technology to print products. Although it is not the first tool to encourage AR application creation, or even the first to target the print market (see HP’s Reveal platform), genARate is notable for its ease-of-use and its application focus.

Read more »

Almost 50% of General Office Workers in the U.S. said their Required Color Printing is Increasing.

Barbara Richards
 Sep 19, 2018

According to recent Keypoint Intelligence/InfoTrends primary research, roughly 50% of 18 to 29-year-olds in general office environments said their required office color printing is increasing compared to 33% for all respondents.   Furthermore, our study found almost 59% of all office workers indicate no change or decrease in their required color printing of work-related documents. Our survey found that companies with less than 100 employees showed a greater increase in their required color printing overall.

For all your required work-related printing is the use of color increasing, decreasing or remaining the same?

In addition, 40% of general office workers said that their optional work-related color printing is increasing. Again, this was highest among 18 to 29-year-olds in our survey results, with 55% stating their optional color printing was increasing. Furthermore, compared with our 2016 survey results, in the U.S., color printing of optional documents is growing.

Growth in color output can be directly attributed to the growth of color devices in the market. In fact, in 2017, color EP office devices grew 2.7% year over year. As the price of color printers and MFPs continue to decline more and more people have access to these devices in the office.    In fact, general office users in our survey, said the reasons they have increased their color printing was that it adds more value to the document, makes it easier to read and that color prints are more influential overall.

This is just a sampling of some of the key findings, from our recent primary research survey results. On October 22nd, Keypoint Intelligence-InfoTrends Office Group Analysts will be presenting a Webinar “Future of Office Print” please select the links below if you are interested in attending.

10AM EST – https://attendee.gotowebinar.com/register/5561315912742553345

2PM EST – https://attendee.gotowebinar.com/register/1882686456762387457

 

HP Announces the Latex R1000 – The Latest Addition to The Latex R Series

Steve Urmano
 Jul 12, 2018

On July 9th HP announced an expansion to its newly released R Series of latex printers, the R1000 Printer. Like the previously released R2000, the R1000 is designed for printing on a number of both rigid and flexible substrates including foamboards, PVC cardboard, fluted polypropylene, solid plastics, aluminum, wood, and glass. Like the R2000, which Keypoint Intelligence reported on when it was first announced, the R1000 is designed for a variety of applications within the sign & display and decorative printing industry segments.

HP Latex R1000 Printer

R1000 Key Specifications

While the HP Latex R2000 focuses on larger PSPs, HP explained in it’s latest press release that the R1000 is designed to be an ideal solution for smaller companies:

“The current portfolio includes the HP Latex R2000 Printer, designed for large-signage printer service providers (PSP’s) who require workflow efficiency and sustained production. With the debut of the HP Latex R1000 Printer, HP is adding depth to offer maximum value in one device. Designed for growing businesses with investment and space constraints, the versatile printer offers a single set of inks for a wide range of flexible and rigid media including applications for retail, outdoor signage, window graphics, events and exhibitions, and decorations.

The new printer comes with three liter-ink cartridges, compared to the larger model with five liters, and is designed to accommodate materials up to 1.64 meters/64 inches wide and up to 5 cm/2-inches thick while the R2000 prints up to 2.5-meters/98-inches wide and up to 5-cm/2-inches thick.”

Additional specifications for the R1000 have been released on HP’s website. Most notable are the smaller footprint (the R1000 measures in at 166 x 143 x 69 in), and productivity of up to 57 m² per hour (614 ft² per hour). The R1000 will also feature the HP Latex White Ink and Overcoat that are used on the R2000.

HP Latex R Series Print Samples (Taken at Print4All 2018)

Analyst Comments

While Latex grew very quickly in the Roll to Roll product segment drastically offsetting solvent sales mainly in NA and EMEA markets over the past several years, we’ll be keeping a keen eye on the impact it will have in the UV Hybrid arena. There are several market conditions that need to be overcome. HP has done well in the low end of the market due to both price point and marketing strength. The UV Hybrid and Roll Markets have already grown double digits the last several years and have already drastically offset and penetrated the solvent arena and this is a very crowded vendor space.

There is a very wide range of low-priced Chinese machines on the market priced below $100K. The Latex R1000 & R2000 1.6 – 3.2 M Wide Format Hybrids come in on the higher end of the price spectrum in a market that has become flooded with lower cost LED UV Hybrids & Flatbeds. In the US, Mimaki, Mutoh, CET, Vanguard, and others have been servicing this segment, so pricing and product performance will be a key issue for market entry.

Time will tell if HP’s marketing machine will be able to overcome these hurdles. However, Keypoint Intelligence sees the potential in Latex with the higher performance R ink-set. It appears to have a whiter white, and lay flatter than UV inks which tend to have a thicker ink deposition. The battle for the durables continues with the domination of ink technology playing a key role.

 

 

Xerox Iridesse – After the glitter settles! Well what if? or Sure why not?!

Marc Mascara
 Jul 2, 2018

Xerox unveiled their latest production printing press during two jam-packed events in the US and Europe. The first event took place May 9th outside Rochester, NY at the Xerox Gil Hatch Center for Customer Innovation — the largest digital print showcase in the world.

Images courtesy of Xerox – Iridesse launch Webster, NY

 

Customers, prospects and the media were invited to the unveiling of the Iridesse press and given the opportunity to kick the tires. The second reveal took place on May 23 in Warsaw, Poland during the 2018 Xerox Forum, where Xerox Premier Partners (customers) and Graphic Communication Resellers attended.

Image courtesy of Xerox – Iridesse launch Warsaw, Poland

 

Both events could be worthy of an Oscar with the pomp and circumstance of a professional product reveal that introduced the global availability of the press.

My colleague Ralf Schlozer’s first impressions of the Iridesse, launched by Fuji Xerox last December, can be found in the post Fuji Xerox Iridesse – Two specialty colours is better than one. I invite you to re-visit Ralf’s blog for all the launch and specific details of the press while I answer the philosophical question of “do printer’s need a press like the Iridesse now that the glitter and dust have settled?”

So, if you ever worked production you know that manufacturer suggested limits are always ignored, especially if you need to get a job out or when client work is accepted in lieu of going to the competition. You see this in the offset world all the time and that is why successful print companies know that being able to configure equipment for different needs trumps equipment with a “wow” factor. Print customers first question is always can you do this, and the printer wants to respond sure, why not?! Digital equipment sometimes puts the printer into the “what if” situation. Basically, well what if we do this instead?

Quality CMYK for the most part is expected in this class of press, but in terms of flexibility, print providers expect numerous options for not only resolution but multiple halftone screens. Having the ability to respond to real time production needs based on image quality and media range gives production the flexibility to confidently accept work. Iridesse meets that challenge with Ultra HD Resolution which delivers 1200 x 1200 x 10 bit RIP resolution and 2400×2400 imaging resolution, enabling screening options from stochastic to fine line screens up to 600 dpi.

Image courtesy of EFI – Xerox EFI Exp6 5/6 color image Viewer

 

Media plays a huge role in just how many jobs and what type of work a print provider can accept. Just as in offset, digital presses must address a wide array of media while running at rated speeds. I would say most equipment manufacturers are fighting it out on this front regarding the range of media weights and types being supported. Iridesse tops out at 400gsm but gives a respectable range from 52 to 400gsm. Production flexibility comes into play when the print providers press supports a wide array of media types and weights, multiple pick points  (i.e., multiple paper trays), that allow for a broad range of supported media and media sizes along with multiple insertion options all running at rated speed. To meet these extreme requirements Xerox equipped Iridesse with technologies integrated throughout the press called “Mixed Media Xceleration”  giving the operator a wide array of run time media options with no slowdown of output.  Its this production flexibility that digital press manufacturers continue to expand upon, driving machine innovations which adds to the acceleration of the offset to digital migration and the continued ability to drive manual labor cost out of the production process. With that said, Iridesse is highly configurable, supporting many finishing scenarios from square fold to booklet making with Plockmatic’s advanced capabilities, again reducing the overall production touch points with greater production flexibility.

One could say that most digital press manufacturers are competitive in all these areas offering their own set of production capabilities, but Xerox upped the ante by making the print order of colors configurable without the need for a service technician!  As in the offset world, you just run a cleanup and change ink, or in this case you swap out the dry toner. As a PSP, you not only have the ability with Iridesse to produce 4, 5 and 6 color work, but you can self-configure which special color will underlay and overlay the CMYK opening a whole host of design capabilities for high value applications.

Xerox calls this snazzy feature “EZ Swap” which allows operators the ability to swap and run two specialty dry inks in a single pass. The key phrase is single-pass. Just imagine what you could do with a press that supports multiple pass capabilities with very accurate registration. I think offset press operators can see where I’m going with this.  Xerox has tapped into one of the last frontiers left for digital press capabilities in opening the ability for the operator to decide the dry ink lay down order with multiple specialty colors and to expand that capability with multiple passes.

Read more »

Keypoint Intelligence Forecasts Continued Growth in Business Inkjet & A4 Color Laser Shipments through 2022 in North America and Western Europe

Barbara Richards
 Jun 18, 2018

While the overall office equipment markets in NA and WE are mature, Keypoint Intelligence/InfoTrends expect continued growth in A4 Color Laser and Business Inkjet Segment 3 & 4 according to recently published SF Printer and MFP Hardware Forecasts for both regions. In addition, the shift from SF printers to multi-functional devices will continue. According to the forecast, in North America, SF Laser printers represented 46% of total shipments in 2017 and are expected to decline to 42% of devices compared with MF shipments which will grow from 52% to 58% by 2022.  While in Western Europe MF shipments will grow from 55% to 59% of total shipments during the same period.

In addition, total NA office color laser shipments are also expected to outperform monochrome devices during the same period growing from 33% of total shipments to 37% by 2022. While in Western Europe, office color laser is expected to grow from 39% of total shipments to 41% during the same period. While the overall market for both regions will remain relatively flat to a slight decline the shift from SF to MF devices and from monochrome to color will continue to impact the overall office equipment market. The biggest opportunity for growth is within the office color laser A4 segments (2-4) for both regions. The chart below provides a breakout by region and segment.

North America & Western Europe Office A4 Color Laser Forecast 2017-2022

Business Inkjet Segments Continue to Grow

In addition to the growth in A4 color laser, Keypoint Intelligence/InfoTrends forecast shows growth in Business Inkjet Segments 3 and 4 through the same period. Business Inkjet Segment 3 is expected to grow at 5.9% CAGR in North America and 2.8% CAGR in Western Europe.  The majority of unit growth will be in A4 MFPs in this business inkjet segment with new models that offer longer life consumables and feature-rich product offerings. This new breed of inkjet devices offers an attractive alternative to laser particularly within the SMB office environment with standard wireless connectivity, high yield consumables and in some cases, comparable cost per page to laser. Furthermore, Inkjet Segment 4 is expected to grow at 10.8% CAGR in North America and 3.7% CAGR by 2022 in Western Europe during the same period, driven by a wider acceptance of page-wide technology and new robust high-speed color inkjet devices entering this market segment.

North America and Western Europe Business Inkjet Segment 3 and 4 Shipment Forecast 2017-2022

Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux