Posts tagged: Xerox

The Top 10 drupa 2016 Exhibitors by Booth Size

Jim Hamilton
 May 3, 2016

Note: This blog has been updated because additional information revealed that Canon and Landa were in a virtual tie for the third and fourth positions.

One good way of gauging a vendor’s marketing spend for a trade show is to see how much show floor space it has. Over the years, InfoTrends has measured booth size for shows like Graph Expo, Print, and drupa. With drupa 2016 less than a month away, we decided to repeat the exercise. This is how it works: we take measurements from the show floor map (in this case, the interactive drupa 2016 one at Then wherever possible we confirm this ranking through public statements or private confirmations from the exhibitors. We do our best to rank this as accurately as possible, but keep in mind that these are InfoTrends’ calculations, not official numbers. The drupa organizers do not publish a list of top vendors by booth size.

drupa 2016 show floor map - 400

So here are the results for drupa 2016 (with history back to 2008): Read more »

Highcon Ramps Up: Lots to Show at drupa 2016

Bob Leahey
 Mar 23, 2016

Highcon, the digital finishing system supplier, recently held a three day event at its headquarters in Israel to show technology developments that it will soon unveil at drupa 2016 in Germany. The short version of our report on this “pre-drupa” gathering:

  • Since its debut at drupa 2012, Highcon has placed 25 of its “Euclid”  and “Euclid II” devices globally
  • In 2016 it will add a new portfolio of digital cutting and creasing systems and related tools, the Highcon Beam, Highcon Euclid III and the Highcon Pulse.
  • These products will give carton converters and other printers new access to Highcon’s unique finishing, and also to two applications new at Highcon, 3D printing and variable data cutting.

 Why Highcon Matters Read more »

Xerox Making MFPs Smarter with New Enhancements

Allison Correia
 Mar 11, 2016

Xerox ConnectKey User Interface

Yesterday, March 10th, Xerox announced advancements to its Xerox ConnectKey technology to expand what multifunction printers (MFPs) can do in the workplace. The Xerox ConnectKey-enabled i-Series MFPs are equipped with ready-to-use apps, speed up paper-dependent business processes and make it easier for users to collaborate and work more effectively. The technology also gives Xerox and its partners opportunities to better understand customer business needs and uncover new recurring revenue streams. Read more »

New Xerox Cut-sheet Color Inkjet in the Zone of Disruption

Jim Hamilton
 Mar 1, 2016

With the announcement today of the Brenva HD Production Inkjet Press, Xerox is showing its first product to be jointly developed from start to finish by the combined Xerox and Impika development teams. The device is a cut-sheet color inkjet printer capable of speeds of up to 182 letter/197 A4 images per minute. At first glance, it looks like an iGen, and though it is built on an iGen frame, it will become clear that under the covers the differences are extensive.

The Xerox Brenva HD Production Inkjet Press

The Xerox Brenva HD Production Inkjet Press

The initial application target is likely to be black & white to color conversion as well as applications like transaction, direct mail, and books because Read more »

Activity Brewing in the Zone of Disruption

Jim Hamilton
 Feb 25, 2016

Inkjet is having, and will continue to have, significant impact on the production digital print market. One of the most active areas for inkjet is in the “Zone of Disruption.” It’s a busy segment, and it will only get busier as drupa 2016 approaches, so now is a good time to revisit the product activity there.

In defining the Zone of Disruption, InfoTrends has in mind inkjet products with a capital acquisition cost of less than $1 million, very competitive running costs, and high levels of productivity. This puts them at speeds faster than current cut-sheet color toner devices, and at a capital acquisition cost lower than most 20” roll-fed color devices. To be truly disruptive there are some other important aspects. These devices must compete in quality and ease of use against the mainstream cut-sheet toner devices. This requires sound design, effective feeding & finishing, as well as workflow software that automates production. Success within niche markets is certainly good, but being disruptive in the marketplace means that these products must address the needs of mainstream cut-sheet and roll-fed color users. As this market progresses, InfoTrends is closely watching for broad levels of success by products in the Zone of Disruption. As of today, only a relatively small number of products fit there and relatively few placements have been made.

Zone of Disruption

The Zone of Disruption fits below the gap between Read more »

Xerox Announces Next Generation Workflow Automation Solutions and More

Allison Correia
 Nov 17, 2015

On November 16th, Xerox announced two new workflow automation solutions for the insurance industry and HR departments, updated versions of two of their platforms (Digital Alternatives and DocuShare), and new components of their MPS strategy for the channel.

Read more »

Eight Print Sample Videos from Graph Expo 2015

Jim Hamilton
 Sep 28, 2015

I’ve recorded eight short videos (each is between two and five minutes long) that highlight some interesting print samples from Graph Expo 2015:

I hope you enjoy these. I’ll be adding some more Read more »

Activity in the Zone of Disruption: Pitney Bowes’ AcceleJet

Jim Hamilton
 Sep 9, 2015

Pitney Bowes has just announced a new product called the AcceleJet printing and finishing system. AcceleJet is a narrow-web, continuous-feed to cut-sheet, inkjet printing system capable of speeds up to 246 feet per minute (75 meters per minute) and throughput exceeding 500 letter-sized images per minute. Intended for a monthly volume range of four to ten million letter/A4 images per month, Pitney Bowes is targeting the AcceleJet at market segments such as service bureaus, direct mailers, and in-house operations in non-profits, financial services, insurance, healthcare, utilities, and government. Pitney Bowes estimates that an AcceleJet system including the controller, print engine, and finishing capable of dynamic perforation, sheeting, and stacking will have an average system selling price of $850,000.

AcceleJet fits well in the gap between existing cut-sheet electrophotographic and continuous feed inkjet color products. This gap, known as “the Zone of Disruption,” is an area where Read more »

Graph Expo Expectations

Jim Hamilton
 Sep 8, 2015

Graph Expo 2015 (September 13-16, Chicago) begins on Sunday and whether you are able to be there or not, here are a few things you should know in advance.

Who Has the Biggest Booths on the Show Floor?

One good way of assessing the level of marketing spend that an exhibitor has made on a trade show is to measure the size of their booth. InfoTrends has been doing this for shows like Graph Expo, Print, IPEX, and drupa for many years. This year, the biggest exhibitors (by square foot of exhibit space as measured from the publicly available show floor map) are shown below.

Canon, as was the case at Graph Expo 2014, has the largest booth, followed by Konica Minolta. HP is in the number three spot, up from number six last year. Xerox dropped down a spot and is followed by Ricoh, EFI, Pitney Bowes, and Standard Finishing. KIP America breaks into the top ten at number nine. Last year’s number nine, Muller Martini, is not exhibiting. The top twelve is rounded out by Kodak, KBA, and Scodix. Traditional offset vendors (including some with new digital offerings) will be exhibiting, but not in the biggest booths (KBA is the only one in the top twelve). Offset system providers with booths include Goss, Komori, manroland, Presstek, Ryobi MHI, and TKS, but not Heidelberg, which hasn’t been a Graph Expo exhibitor since 2011.

Read more »

Print Samples Are Important

Jim Hamilton
 Jul 15, 2015

In a nutshell, here’s why I think print samples are important. As new printing systems enter the market you can assess their market readiness by the vendor’s ability to provide print samples. Early on in a product’s development, vendors are very cautious with print samples. They don’t hand them out freely, sometimes even showing them under glass or in sample books that are chained to display cases. Once a product gets close to release, the system vendors begin to hand out prepared print samples and they also offer to produce output from files provided by existing customers and sales prospects. This stage is symbolic because it signifies that the vendor believes that the product is ready for market.

To underscore my point I have recorded dozens of print sample videos for a broad range of production digital print products. A couple of my recently recorded print sample videos are Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux