Posts tagged: Packaging

Xeikon at drupa 2016: Another Must-See Exhibitor

Bob Leahey
 May 18, 2016

With drupa 2016 about to start, InfoTrends has written reports and blogs on key digital printing and finishing companies that will exhibit products for packaging and label converting there. With this report we will preview one more important drupa exhibitor, Xeikon.

A drupa-Sized Entrant Read more »

How Life Unfolds

Jim Hamilton
 Jan 26, 2016

You may have seen the television ad where a boy is throwing paper airplanes over a fence to communicate with his dad, who is away on active duty. Each paper airplane contains a note from the boy to his father. A kindly neighbor on the other side of the fence notices the airplanes, puts them in a box, and sends them to the father. Sometime later, the neighbor receives a box in the mail full of paper airplanes with notes from the dad to his son. The neighbor takes the airplanes and throws them one by one over the fence, where they are discovered by the boy. The story is heartwarming and it’s a Hallmark moment for sure, but this is not a greeting card commercial. What is this ad promoting? The answer might surprise you—it’s paper and packaging.

Letters to Dad

This is one of three television advertisements created by the Paper & Packaging Board as part of a campaign called “Paper & Packaging – How Life Unfolds.” This multi-million-dollar promotional campaign began in the middle of 2015 and includes not only television exposure, but also print and online ads. The target audience is Read more »

InPrint 2015 – demonstrating that print is much more than ink on paper

Ralf Schlozer
 Dec 21, 2015

November 2015 saw the second instalment of InPrint, the industrial print show and conference. A total of 3,400 visitors from 68 countries came to the Munich Trade Fair Centre. Compared to the previous event in Hannover, the numbers of exhibitors, attendees and foot print increased by a third.

InPrint focussed on three fields of application: functional, decorative and packaging printing. Unlike traditional printing shows, InPrint has a different attendee profile: Typical visitors to InPrint are companies such as system integrators, materials developers, and manufacturers interested in providing solutions for the industrial/decorative print market. But even if you do not intend on integrating a custom press, the show is a good opportunity to get informed on where printing technology is being used beyond document printing. Print service providers, who visit InPrint, have been able to expand their horizon while visiting vendor booths as well as attending the conference with its extensive program.

Read more »

Xeikon – the new digital printing solutions division of Flint

Ralf Schlozer
 Nov 24, 2015

On Friday the 20th of November the news broke that the Flint Group has bought Xeikon from previous venture capital owner Bencis, almost two and half years after they bought the digital print and platesetter business from Punch International.

Xeikon will continue to operate in its existing lines of business and will now become a new division known as Flint Group Digital Printing Solutions. Even in terms of personnel, continuity is sought, with Xeikon CEO Wim Maes staying as president of the division. The deal needs the approval of European competition authorities, which is expected by end of 2015 as there should not be any concerns about the transaction.

In some ways the acquisition marks a U-turn for Flint after it sold its nascent Jetrion inkjet division to EFI in 2006. EFI paid around $40 million as its first investment in inkjet printing, in the process starting a new line of business, while digital activities pretty much stopped at Flint. Now Flint Group feels it is ready to throw their hat again into the digital arena, possibly seeing the success the Jetrion business is having today. A bigger driver is likely the changed ownership that Flint Group itself is now experiencing. Since 2014 Flint has been essentially an equity capital owned business, owned by Goldman Sachs Merchant Banking Division in partnership with Koch Equity Development. Prior to that, Flint had grown by acquisition and merger into a leading position in litho and packaging inks. To this day, Flint continues to acquire other ink businesses to consolidate its position.

Read more »

Brewing in Belgium: KHS & Martens Brouwerij Ramp Up ‘Direct-to-Shape’ Printing

Bob Leahey
 Aug 19, 2015

Color digital printing for packaging got a boost in Europe recently when a brewer long known for innovation, Martens Brouwerij (Belgium) publicized its use of a direct-to-shape print system to print PET bottles in full color, starting in June 2015. Called “Direct Print Powered by KHS™”, the system is engineered and built by KHS (Germany), a global supplier of filling and packaging solutions to the drinks industry, and commercialized by a wholly-owned KHS subsidiary, NMP Systems. The system, based on Xaar 1002 heads, Read more »

Konica Minolta Announces Next Generation High Resolution, High Speed MEMS Printheads

Ron Gilboa
 Jul 27, 2015

Konica Minolta, a long time innovator in inkjet technology with over 30 years of experience, has released information on a new generation of print heads aimed at the evolving graphic arts, industrial, and functional printing markets. These printheads have resolution as high as 1,200 nozzles per inch (npi), drop size as low as 3 picoliters, jetting frequency of up to 100 kHz, and a physical size that is significantly smaller than the previous generation of Konica Minolta heads. As with many print head manufacturers Konica Minolta is manufacturing these printhead using Micro Electro Mechanical Systems (MEMS) fabrication. Konica Minolta’s high precision printhead is capable of jetting of a range of inks and functional materials such as resins. These new capabilities will enable innovative new products in a range of industries. Konica Minolta expects to begin mass production of these heads in the spring of 2016. Read more »

HP Indigo: Gearing Up for LabelExpo

Ralf Schlozer
 Jul 21, 2015

In July HP hosted a worldwide HP Indigo VIP event in Israel. More than 250 customers and prospects visited from dozens of countries from all over the world – including USA, about 10 different European countries, China, the Philippines, Australia, Thailand, Mexico, USA, Brazil, South Africa, and more. There were dozens of sessions presented in each of the four tracks: Flexible Packaging, Labels, Folding Cartons and Commercial Printing. In addition to visiting HP Indigo labs and manufacturing facilities, attendees also visited local HP Indigo customers according to their tracks.

The event provided a great opportunity to present some news ahead of LabelExpo Europe, which is taking place end of September in Brussels. Packaging, and especially label printing, is now a major business for HP Indigo. According to HP label volumes are growing by 25% every year. With a forecast of more than 600 million square meters of labels to be printed in 2015 HP claims to represent nearly 10% of the global label market value and has established itself as major player not only in digital print, but in the whole label print market.

However HP Indigo is extending its coverage beyond label markets. While the ws 4000 and 6000 series are firmly rooted in the label market with only occasional installs in folding carton, shrink sleeves and in-mould labels, the HP Indigo 20000 marks a distinctive move into adjacent packaging markets. Of the roughly 30 installations of the 20000 so far most are used for flexible packaging, followed by shrink sleeves, with only a minority used purely in label printing. Meanwhile, HP Indigo has 20 or more installations of the 30000, the B2 sheet fed press that mainly prints folding cartons. Read more »

A Decade of Dscoop

Barb Pellow
 Mar 11, 2015

Last week, like many others I braved snow, sleet, and freezing rain to get to DscoopX in Washington DC.  While the weather outside was less than desirable, there was tremendous spirit and enthusiasm for the industry and digital technologies inside the Gaylord Convention Center.

Snowy D.C. Weather

More than 2,000 print professionals from 41 countries and over 115 business partners participated to share perspectives on how to “Xpand Print”.  According to show organizers that means that since inception more than 20,000 HP end users worldwide have participated in a Dscoop event. DscoopX had the largest Dscoop solutions showcase ever with over 45,000 square feet of exhibitions. It had the biggest HP presence in the solutions showcase in Dscoop history featuring an HP Indigo 30000, HP Indigo 20000, two HP Indigo 10000 units, and an array of large format technology all showcasing applications and opportunities for digital technology.
Read more »

Thinking Ink: Canon Solutions America Celebrates its 2nd Anniversary

Jim Hamilton
 Feb 17, 2015

About a year after Canon Solutions America (CSA) announced that it was exploring the idea of forming a user group for its production print customers, it has announced a name for the group and the date of its first event. The group is called the thINK Customer Community and its inaugural event, the thINK Customer Conference, will take place September 8th to 10th in New York. The thINK Customer Conference will overlap with Canon’s Expo (the once every four year showcase of Canon technologies).

Though thINK is described as a “Community of Canon Solutions America Production Print Customers,” the focus is clearly on inkjet, Read more »

A Landa 2014 Update

Jim Hamilton
 Dec 12, 2014

The Landa marketing machine had gone a little quiet recently. No word from them at Graph Expo or All in Print China. It wasn’t like them to be so reserved but that all changed this week with a media push that included a video showing their progress with their B1-format cut-sheet digital color printer; a blog by Benny Landa; a couple of quotes from printers who were shown samples (see more on this below); and a few other things such as the announcement of two new hires, a partnership with AVT, and an award to Benny Landa (the Ernst & Young Israeli Entrepreneur of the Year).

Landa said that it will be starting beta tests sometime in 2015 after potential beta customers visit the Landa headquarters in Israel in March. It seems likely that Landa should have a market-ready product Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux