Posts tagged: Komori

First Impressions of IPEX 2014

Ralf Schlozer
 Mar 24, 2014

Today IPEX 2014 opened its doors. IPEX has a four-year cycle and is timed to fall in the period between two drupa trade shows. IPEX made its name as a show where prospects could check the status of new products that had been “pre-announced” at drupa. It has ranked as one of the largest graphic arts trade shows in the world. After many years in Birmingham, 2014 is the show’s first year at the London Excel exhibition grounds. The move to the new location in London was significant, but that fact was overshadowed by the very well-publicized withdrawal of most of the major printing equipment manufacturers. In fact, over the past year there has been much discussion about whether IPEX would even take place at all. Well, it is taking place, but at a much smaller scale.

InfoTrends has already written about the move by many vendors to shun trade shows Read more »

Digital Print in 2014 – Better Late than Never for B2

Ralf Schlozer
 Feb 3, 2014

As we look back on the new product announcements from 2013, I have to admit that the year was largely overshadowed by drupa 2012 and the many new and exciting technologies shown there. We were especially eager to see the new B2 products enter the market in 2013, but it has proven to be a rather slow process. As analysts with many years in the industry, we experienced that launch schedules are overly optimistic side and that the actual product launches often seem to drag on forever. But the announcements from drupa 2012 seem to have taken these delays to a new dimension.

It seems that the duration from the first tech demo to  the beta test phase and then to final product is getting longer and longer. Admittedly the line between an early product demonstration and a technology demo is blurred. Many vendors take a cautious approach and label the new announcements as technology demonstrations. Also technology demoes may never end in a product at all. Still, prospective users want to know when they can expect a launch date of a new product or at least know when limited availability will start for early users. Read more »

Frankly Speaking: The Quiet Revolution of Digital Printing

Frank Romano
 Nov 4, 2013

A few years ago, you could not turn around without hearing or seeing something about digital printing. The noise has quieted down, but the changes keep on coming.

Offset press manufacturers now send out a press release every time they sell a system because it is such a unique event. There is still a good market for offset presses, but it is smaller that ever and getting smaller.

Komori and KBA were the only press makers at the PRINT show. Komori actually had a press. “Find us by following the noise,” I was told.

Digital printing volumes are growing nicely, but no one notices. Read more »

Landa and Komori Strengthen Sheet-Fed Technology Partnership

Jim Hamilton
 Nov 1, 2013

In a further sign that Landa is moving closer to beta testing and production, today Landa and Komori announced that the companies have extended their alliance through a formal licensing agreement. In addition, Landa has ordered production units of the Komori sheet-fed platform for use in the Landa S10, which is going into beta testing early next year and is expected to be delivered to customers in the fourth quarter of 2014. Landa added that it would be using Komori’s sheet-fed platforms for all of its sheet-fed Nanographic printers.

Yoshiharu Komori and Benny Landa

Landa said that since drupa its engineers have been evaluating proposals from European and Asian sheet-fed press vendors. Landa signed partnership agreements with three companies at drupa: Heidelberg, Komori, and manroland’s sheet-fed division. While other sheet-fed platform providers may have been considered in addition to these three, today’s announcement confirms that Komori has come out on top. Komori surely had an edge going into the evaluation process since it provided the sheet-fed platforms for the Landa devices shown at drupa.

Read more »

Where Would You Rather Go for a Product Demo: A Corporate Demo Center or a Customer Site?

Jim Hamilton
 Oct 22, 2013

Kodak is leveraging Charlotte, NC-based ImageMark as a customer demonstration center

If you were looking to purchase a production digital printing device, a platesetter, or workflow software, where would you rather see it? I think it’s clear that if possible you’d like to see it in action at a customer site. At a customer site, you could see an actual implementation and ask real-world users all the questions you want about the product: Does it do all they say it can? What problems have you had? Is it upgradeable? Can it handle the types of jobs that I want to run on it? What are the service and consumable costs associated with this product? Of course this type of dialog is ideal, but how many sites would be willing to put up with this on a regular basis? Recently, I got a chance to see how this might work at an innovative print service provider called ImageMark Business Services in Gastonia, North Carolina (just outside Charlotte), which is embarking upon a partnership with Kodak.

Read more »

The Top Ten Trends from PRINT 13

Jim Hamilton
 Sep 27, 2013

These are InfoTrends’s top ten trends from PRINT 13:

  1. Who was there? Who wasn’t? Agfa’s departure from the show floor over the summer added another important company to the small cadre of vendors skipping the show (Heidelberg, Kodak, and Screen). In truth, Kodak actually did have a booth, a smallish one at the very back of the show floor, but it wasn’t what you would typically expect out of them. Of much greater importance was Kodak’s participation in others’ booths, including Konica Minolta (for Creo and Prinergy) and Adphos (for the Prosper Imprinting heads). And though the timing of Kodak’s emergence from Chapter 11 may have made a big presence unadvisable, it was nevertheless a missed opportunity to show off the new Kodak to its core audience. It is also clearly time for Kodak to name a new leader who will bring the market knowledge and vision for the next chapter in the company’s history. This has dragged on way too long. Read more »

Landa Highlights Revised Design of the Landa S10

Jim Hamilton
 Sep 23, 2013

Today Landa Digital Printing announced design adjustments to the Landa S10FC and S10C while also noting that the S10FC would enter beta testing in the fourth quarter of 2014 while the S10C beta would begin beta in the first half of 2015). The most visible design adjustment is a shifting of the large touch-screen user interface to the backend of the device.

Landa S10C with the operator cockpit at the left by the delivery; to the far right, the print engine and feed unit

Note: The Landa S10FC is the folding carton version and the Landa S10C is for commercial and publishing printing. Both devices are capable of producing 6,500 four-color B1-format sheets per hour with a maximum paper size of 29.5 by 41 inches (750 by 1050 centimeters). The S10C is also duplex capable and has a rated speed of 3,250 sheets per hour when printing on both sides.

Read more »

MasterWork and Taichuan Collaborate on Digital Color Inkjet Printer at China Print 2013

Jim Hamilton
 May 21, 2013

One of the big news stories from China Print 2013 is a technology demonstration by MasterWork and Taichuan of a sheet fed UV inkjet-based digital color printer with a print width of 420 millimeters. This is the first color inkjet model of its type from a Chinese vendor.

Read more »

Landa Update at EFI Connect

Jim Hamilton
 Jan 16, 2013

Benny Landa was at EFI’s Connect event in Las Vegas this week and as part of a fireside chat with Guy Gecht and a separate meeting with the trade press and industry analysts he provided a status update.

  • Market progress — Landa reported that his company had signed 430 letters of intent (LOI), a significant portion of them coming with deposits. These LOIs were from all over the world, including quite a number from Asia Pacific. He noted that the company was on track with product development and expected to have its first product in beta testing at the end of 2013. This will be the Landa S10 cut-sheet, B1-format device, which Landa said was the most popular configuration. Landa also said that the platform’s print resolution has been increased from 600 to 1,200 dots per inch. Read more »

Frankly Speaking: No Printing Process Dies

Frank Romano
 Oct 4, 2012

These are the three devices that replicate paper-based documents in quantity: copier, printer, and press.

The difference between a copier and a printer is that the copier requires a hard copy original and the printer requires an electronic file. My guess is that very few, if any, copiers are manufactured any more. The light lens system has been replaced with a scanning system connected to a printer. A Multi Function Printer (MFP) is called that because it can copy, scan, print, and fax. Old habits die hard so they are still called copiers; although, most are really MFPs.

Printers evolved from Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux