Posts tagged: IS29

Komori Highlights the Impremia IS29 at an Open House in Tsukuba, Japan

Jim Hamilton
 Dec 12, 2016

We were in Japan last month and as luck would have it we were there at the same time that Komori held an open house to showcase its newest digital print solutions. This international event took place at Komori’s facility in Tsukuba, Japan and drew hundreds of attendees from all over the Asia Pacific region. It provided the opportunity to showcase Komori’s Impremia IS29, a B2-format, sheet-fed, UV inkjet printer capable of speeds up to 3,000 simplex sheets per hour. Also on display were a six-unit, 18,000 sheet per hour, B1-format Komori Lithrone GX40RP H-UV offset press running UV inks and a Komori Apressia DC105 die cutter. Komori’s recently announced sales partnership with Highcon was clear to see through the demonstration of the Euclid II+ during the open house. Horizon, also a Komori partner, showed a saddle stitcher.

Komori facility entrance - 700

The theme running across all of the products shown was a demonstration of a hybrid workflow for test marketing a national campaign for a cosmetic product. Read more »

The Top Ten Trends from PRINT 13

Jim Hamilton
 Sep 27, 2013

These are InfoTrends’s top ten trends from PRINT 13:

  1. Who was there? Who wasn’t? Agfa’s departure from the show floor over the summer added another important company to the small cadre of vendors skipping the show (Heidelberg, Kodak, and Screen). In truth, Kodak actually did have a booth, a smallish one at the very back of the show floor, but it wasn’t what you would typically expect out of them. Of much greater importance was Kodak’s participation in others’ booths, including Konica Minolta (for Creo and Prinergy) and Adphos (for the Prosper Imprinting heads). And though the timing of Kodak’s emergence from Chapter 11 may have made a big presence unadvisable, it was nevertheless a missed opportunity to show off the new Kodak to its core audience. It is also clearly time for Kodak to name a new leader who will bring the market knowledge and vision for the next chapter in the company’s history. This has dragged on way too long. Read more »

Landa Highlights Revised Design of the Landa S10

Jim Hamilton
 Sep 23, 2013

Today Landa Digital Printing announced design adjustments to the Landa S10FC and S10C while also noting that the S10FC would enter beta testing in the fourth quarter of 2014 while the S10C beta would begin beta in the first half of 2015). The most visible design adjustment is a shifting of the large touch-screen user interface to the backend of the device.

Landa S10C with the operator cockpit at the left by the delivery; to the far right, the print engine and feed unit

Note: The Landa S10FC is the folding carton version and the Landa S10C is for commercial and publishing printing. Both devices are capable of producing 6,500 four-color B1-format sheets per hour with a maximum paper size of 29.5 by 41 inches (750 by 1050 centimeters). The S10C is also duplex capable and has a rated speed of 3,250 sheets per hour when printing on both sides.

Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux