Posts tagged: ImageStream

Canon targeting commercial print with the Océ ProStream

Ralf Schlozer
 Feb 21, 2017

Continuous feed colour inkjet has put its mark onto digital print for a number of years now, but it has been slow to escape the confines of transactional printing, despite some success in direct mail and book printing. While transaction print is set to decline, the much more attractive market would be moving into commercial print and converting portions of the immense offset print volume to digital. That is easier said than done however, with the demands for print quality and paper range being much higher in commercial print, compared to transaction print. Several devices have been launched to target this market, but success so far has been limited.

With its latest announcement on the 17th of February Canon plans to take advantage of this opportunity with a new product called Océ ProStream. The ProStream supports a print width of 540 mm, a maximum speed of 80 metres per minute, and a duty cycle of 35 million A4 pages per month. The printer is targeted to offer high print quality on a large range of substrates. Canon cites four major reasons why the ProStream should finally be able to gain a larger portion of the commercial print market:

– New 1,200 nozzle per inch Kyocera piezo drop-on-demand inkjet heads

– A new high-density polymer-based ink system – including ColorGrip primer

– A new, non-contact “flotation air” drying system

– A new usability concept supporting native PDF and PDF/VT Read more »

Print Samples Are Important

Jim Hamilton
 Jul 15, 2015

In a nutshell, here’s why I think print samples are important. As new printing systems enter the market you can assess their market readiness by the vendor’s ability to provide print samples. Early on in a product’s development, vendors are very cautious with print samples. They don’t hand them out freely, sometimes even showing them under glass or in sample books that are chained to display cases. Once a product gets close to release, the system vendors begin to hand out prepared print samples and they also offer to produce output from files provided by existing customers and sales prospects. This stage is symbolic because it signifies that the vendor believes that the product is ready for market.

To underscore my point I have recorded dozens of print sample videos for a broad range of production digital print products. A couple of my recently recorded print sample videos are Read more »

Making a Strong Case for Inkjet

Jim Hamilton
 Jul 1, 2015

Last week Canon Solutions America held a special inkjet event at one of its best customers, IWCO Direct in Chanhassen, Minnesota. IWCO Direct produces millions of letters a month as part of direct mail campaigns for many major brands. The variable component of these campaigns is printed and finished on a range of equipment including Canon Océ monochrome toner and color inkjet offerings. IWCO Direct is also active in Canon’s customer advisory councils and so they were a logical choice as the first site in the United States to have two of the latest inkjet products to come out of Canon: the cut-sheet Océ VarioPrint i300 and the continuous-feed Océ ImageStream 3500.

Both of these new products have strong potential, and Read more »

Thinking Ink: Canon Solutions America Celebrates its 2nd Anniversary

Jim Hamilton
 Feb 17, 2015

About a year after Canon Solutions America (CSA) announced that it was exploring the idea of forming a user group for its production print customers, it has announced a name for the group and the date of its first event. The group is called the thINK Customer Community and its inaugural event, the thINK Customer Conference, will take place September 8th to 10th in New York. The thINK Customer Conference will overlap with Canon’s Expo (the once every four year showcase of Canon technologies).

Though thINK is described as a “Community of Canon Solutions America Production Print Customers,” the focus is clearly on inkjet, Read more »

Canon Advances its Production Digital Color Portfolio

Jim Hamilton
 May 29, 2014

At the Canon for Business 2014 event in Poing, Germany and at the FESPA trade show in Munich last week, Canon Océ showed strong signs of progress in a variety of areas related to digital color printing through a series of announcements:

  • High-speed color inkjet printing on standard coated offset papers’ Announced but not shown in Poing was a new inkjet system that Canon Océ representatives say can print on a range of offset paper stocks, including coated ones, without the use of bonding agents or primers. The solution, according to Canon, can accomplish this due to its high resolution, small ink droplets, dryers, and a special aqueous pigment ink formulation. The Canon Océ ImageStream 3500 runs at up to 160 meters per minute (525 feet per minute) at 1,200 x 600 dot per inch resolution on a 750-millimeter (30-inch) web. (The device can also run at 1,200 x 1,200 dpi, though at half the speed of 1,200 x 600.) Canon expects the product to be available at the beginning of 2015. InfoTrends will learn more about this product soon (Canon hosted analysts, including InfoTrends’ Ralf SchlÅ‘zer, in Tokyo last week), but for now, it’s intriguing to consider that a vendor has come up with a solution to address standard coated offset papers without inkjet treatments of any kind. (See Ralf Schlozer’s blog on the ImageStream 3500.)

Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux