Posts tagged: i300

A New Entry in the Zone of Disruption: the Canon Océ VarioPrint i200

Jim Hamilton
 Apr 20, 2017

Many of you will be familiar with the phrase “the Zone of Disruption.” InfoTrends has been using it to describe an interesting gap that has formed between two product classes: cut-sheet toner-based printers and roll-fed inkjet printing systems. The roll-fed inkjet models are extremely productive, but also carry with them a price tag of more than $1 million. The cut-sheet toner-based products are much more affordable, but typically don’t offer speeds much faster than 150 pages per minute. InfoTrends defined the Zone of Disruption as an opportunity for products with price points below $1 million, speed faster than most electrophotographic cut-sheet color printers, very competitive running costs, and production-oriented features (such as integrated finishing and advanced front ends). A handful of products have appeared in the Zone of Disruption over the past few years and this week a new one joined the fray: Canon’s Océ VarioPrint i200.

VarioPrint i-Series horizontal cropped

In most ways, the VarioPrint i200 is very much like the i300. It looks like it, has the same footprint, and virtually all of the same features. Two aspects differentiate the two products. The i200 runs at 194 letter size pages-per-minute (ppm) and the i300 runs at 294 ppm. There is also a significant price differential. Canon reports that the i200 is priced 20% below the i300. Although Canon did not announce pricing, InfoTrends expects that this would put the list price of the i200 at somewhere between $600,000 and $650,000. The i200 will be available in the U.S. in June through Canon Solutions America. The two products now form a product family that Canon is referring to as the Océ VarioPrint i-Series.

Read more »

New Print Sample Videos for International Print Day

Jim Hamilton
 Oct 18, 2016

In honor of International Print Day, InfoTrends is releasing ten new print sample videos. This brings to 100 the number of print sample videos I’ve recorded since 2012. Here are the new ones:

  1. HP Indigo books and output on canvas
  2. Kodak Flexible Film technology demonstration
  3. Touch7 and the Ricoh C5110
  4. Xeikon Trillium and 9800 samples
  5. OKI C942 CMYK plus white on colored sheets
  6. Selected dimensional and foil print samples (included are examples from Duplo, Eagle Systems/Kurz, Intec, Konica Minolta, MGI, and Scodix)
  7. Envelope printing (included are examples from Bell+Howell, Pitney Bowes, Sensible Technologies, and Spiral Binding)
  8. Canon imagePRESS 850 direct mail and photo book samples (finished on a Duplo DC-646 and a Plockmatic BLM50)
  9. An International Paper substrate comparison on the Canon Océ VarioPrint i300
  10. Why I Record Print Sample Videos

For the previous ninety videos, go to the Print Sample channel on the Jim Hamilton YouTube page.

For those who are not familiar with International Print Day, it is “24-hour celebration without borders” for “anyone with an interest in the original communication delivery device…to join the planet’s largest conversation about print in all its forms.” International Print Day starts at 6 pm ET on October 18th (11 pm GMT, 9 am AEST) and will finish 24 hours later. Those wishing to participate on social media should use the hashtag #IPD16.

International Print Day logo, IPD16_site_hdr

Read more »

Activity Brewing in the Zone of Disruption

Jim Hamilton
 Feb 25, 2016

Inkjet is having, and will continue to have, significant impact on the production digital print market. One of the most active areas for inkjet is in the “Zone of Disruption.” It’s a busy segment, and it will only get busier as drupa 2016 approaches, so now is a good time to revisit the product activity there.

In defining the Zone of Disruption, InfoTrends has in mind inkjet products with a capital acquisition cost of less than $1 million, very competitive running costs, and high levels of productivity. This puts them at speeds faster than current cut-sheet color toner devices, and at a capital acquisition cost lower than most 20” roll-fed color devices. To be truly disruptive there are some other important aspects. These devices must compete in quality and ease of use against the mainstream cut-sheet toner devices. This requires sound design, effective feeding & finishing, as well as workflow software that automates production. Success within niche markets is certainly good, but being disruptive in the marketplace means that these products must address the needs of mainstream cut-sheet and roll-fed color users. As this market progresses, InfoTrends is closely watching for broad levels of success by products in the Zone of Disruption. As of today, only a relatively small number of products fit there and relatively few placements have been made.

Zone of Disruption

The Zone of Disruption fits below the gap between Read more »

Activity in the Zone of Disruption: Pitney Bowes’ AcceleJet

Jim Hamilton
 Sep 9, 2015

Pitney Bowes has just announced a new product called the AcceleJet printing and finishing system. AcceleJet is a narrow-web, continuous-feed to cut-sheet, inkjet printing system capable of speeds up to 246 feet per minute (75 meters per minute) and throughput exceeding 500 letter-sized images per minute. Intended for a monthly volume range of four to ten million letter/A4 images per month, Pitney Bowes is targeting the AcceleJet at market segments such as service bureaus, direct mailers, and in-house operations in non-profits, financial services, insurance, healthcare, utilities, and government. Pitney Bowes estimates that an AcceleJet system including the controller, print engine, and finishing capable of dynamic perforation, sheeting, and stacking will have an average system selling price of $850,000.

AcceleJet fits well in the gap between existing cut-sheet electrophotographic and continuous feed inkjet color products. This gap, known as “the Zone of Disruption,” is an area where Read more »

2016 InfoTrends, Inc.

WordPress Appliance - Powered by TurnKey Linux